cannot insert edge in the exact mode

[Anonymous]

in the sculpt environment i cannot insert an edge in the exact mode. The following error message pop up every time i try to create an edge in exact mode.

Error: Could not create new edge

[TrippyLighting]

No screenshots, screencasts ? Do you have a model you can share ?

[Anonymous]

Hi. I am experiencing the same problem.

I just follow the Autodesk Academy course "Product Design in Fusion 360: From Idea to Prototype"

I use Fusion 360 on Mac (it might be not a problem on Windows). 

Do you have any solutions?

[TrippyLighting]

Can you share the model ?

[Anonymous]

Apparentely this bug was brought from Inventor (I don’t know about the other Autodesk products), that at some point some functions stop working.
Save-project-and-Fusion-relaunch helps to solve this problem.

P.S. Don’t want to start a new thread.
Is there a way to re-dimention t-spline forms? I meant, bring that dialog box which appears when t-spline form is being created.

[TrippyLighting]

---

@Anonymous wrote:

Is there a way to re-dimention t-spline forms? I meant, bring that dialog box which appears when t-spline form is being created.

---

No, not in Fusion 360.

[subteblu]

Same problem here, same course  "Product Design in Fusion 360: From Idea to Prototype",  Section 2 Lesson 7, minute 12:12, impossible to insert exact edge there. Im using last version of Fusion 360, Windows 10.

https://www.udemy.com/diseno-de-productos-en-fusion-360-de-la-idea-al-prototipo/learn/v4/t/lecture/6...

[mavigogun]

Keep in mind that T-Splines REALLY like continuous Loops.    I was able to locate the Edge by selecting the entire Loop, creating the new Edge all the way around the part, then deleting the "unwanted" segments.    That said, I wouldn't delete those segments- just let 'em be:  those 3 Edge intersections will cause you serious grief later.    I wonder how @Anonymous resolved the issue.

[Anonymous]

Without any workaround just restart Fusion 360. That helps in many cases.

[TrippyLighting]

@Anonymous it won't in this case 😉

[subteblu]

Restart does not work in this case, I even uninstalled and re-installed Fusion and it does not work. It happened too to me in a previous lesson that indicated doing one side with a simple edge and the other with an exact edge to see the difference.

[subteblu]

I'll try that, Thanks.

[mavigogun]

---

@subteblu wrote:

Restart does not work in this case, I even uninstalled and re-installed Fusion and it does not work.

---

Sadly, restarting can't transform T-Splines or my looks- well, unless I'm taking a dance break.

[Anonymous]

If you have a negative Insert Location value, try putting a positive Insert Location value instead.

[robertmbarryjr]

I had this same problem and changing from a negative insert location value to a positive one worked.  Thanks.