Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
As per title, I'm changing a 2 layer design to 4 layer, and so updated the project with the usual (1+2*15+16) settings but it seems like something is wrong as route2 is not orange, but some cross-hatch blue color.and route15 is crosshatch red. These have been filled with solid polygons for GND and VCC, and so should appear solid. I've tried closing and opening the project again, but this problem remains. Do I need to start a new project?
No , this is correct. When you go to the layer, you can change how it looks in either color or fill style. This fill type will only show that way on your screen, when you do a gerber, you'll see that it's 100% and not hatched. If you want to see it as full, for viewing purposes, go to your visible layers, double click on that specific layer, and change the fillstyle.
