Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hey, so I'm trying to use the autorouter feature and for some reason it isn't routing my airwires when I connect connect the signals. The only time I've used the autorouting was back in the 6x version and the airwires were generated from the schematic. Well this board doesn't really require much of a schematic so I opted to just make the board without one. Below is a video that helps to show the issue that I'm having. Any help on the matter is appreciated!
I don't use the autorouter myself but at a glance it looks like your dimension layer outline is not being correctly picked up. All your pads are off the board according to Eagle's assessment so the autorouter can't do anything with them.
I'd also suggest that even that board contains enough to be worth drawing a schematic but that's a separate issue.
