Turnout dimension Profile label Unable to mark dimension to full length of Turnout in profile

[Krishnamoorthy_Ramanujam3RD7L]

Dimension line->End point anchor point-> Rail Turnout end dimension is  pointing to CM, which is middle of turnout , Which shall be modified to point the JT_Main (end of triangle).

Dimension line->End point anchor point-> Rail Turnout middle shall be modified to point the CM (Triangle start point). Which will enable user to mark dimension the entire length of Turnout.

And, dimension distance not showing full length of Turnout. Length shown in below image 9.902 is no the full length of turnout, which 24.804 as per the DIMHOR

Ref:-

[Krishnamoorthy_Ramanujam3RD7L]

This IDEA shall be closed.

By selecting Appropriate Start point and end point, I am able to mark the dimension for length of turnout.

[TimYarris]

Thank you for confirming, @Krishnamoorthy_Ramanujam3RD7L . I'll close this idea.

[replyT8AGF]

Your idea has the potential to make a real difference, thank you for sharing it. Liteblue