Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
It would be great if I could create a bunch of Parcels (from objects) along a road, then have a tool to select the parcels, identify the frontage, give a setback distance, and have the tool check the lot widths at the setback.
This would save a lot of time especially around cul-de-sacs and on curves of the road.
Don't forget that Parcel Creation Tools measure by Arc/Segment Length - NOT Chord Length - as is required to meet municipal & client product fit requirements.
One ends up needing to know the Arc/Segment Length that represents the desired lot width (at front/rear setback, whichever is controlling that particular lot) for each-and-every-single centerline radii used to access said lots (just you basic calculation of degree of curvature, Ha!), or simply lay everything out manually using a Circle at the controlling setback on the Convex/Concave side of any lots with curvature... Because that's a great use of Civil 3D's power! Haha
