Point cloud x and y coordinates appear to flip after inserting point cloud from drawing object.

[dbartholPQYPW]

I inserted a point cloud that I processes in Recap Pro. The point cloud appears to insert to the correct coordinates but as soon as I "insert points from drawing object", it appears to flip the x and y coordinates.

[Pointdump]

Hi David,
Please post a link to your point cloud.
Dave

[Pointdump · Accepted solution]

David,
Whenever you insert a point cloud into a drawing, first use command UNITS to set "Units to scale inserted content" to whatever your target system units were in ReCap.
Dave

[dbartholPQYPW]

https://bdadevelopmentservicespllc-my.sharepoint.com/:u:/g/personal/daveb_bdaland_net/Ed5XeuXxH2pIlO... 

[dbartholPQYPW]

[https://res.cdn.office.net/assets/mail/file-icon/png/zip_16x16.png]USGS.zip<>

[Pointdump · Accepted solution]

David,
I had a closer look at your drawing. If you turn off the Transformation Tab, use command GEOREMOVE, re-assign VA83-SF, then everything works as expected.
Dave

[dbartholPQYPW]

The point cloud inserts correctly but when I create a surface from point cloud, it does not appear to create a correct surface. The surface shows up in prospector but when I run a quick profile to check, nothing shows on the profile.

Here's a link to the files:

https://bdadevelopmentservicespllc-my.sharepoint.com/:f:/g/personal/daveb_bdaland_net/EjkzHMNjAoxGgg...