Nachricht 1 von 53

Nicht anwendbar
06-06-2015
09:59 PM
- Als neu kennzeichnen
- Lesezeichen
- Abonnieren
- Stummschalten
- RSS-Feed abonnieren
- Kennzeichnen
- Melden
Dear Mr Jon Wilde,
I had designed a part, like picture below. And I want to reduce the Volume Flow Rate from 10-20l/h to 1-2l/h by a narrow way for water. But in Simulation I still got outface water have a same Volume Flow Rate with inface water. Can you help me to explain why and how to fix it?
Here is my CFD file: it 13Mb, I can't upload to this forums...http://www.mediafire.com/download/mk7tu100ttgds97/TEST+PART+CFD.cfz
AND the narrow way for water
I have attached my DWG file design and my CFD Simulation. If possible, pls help me to understand why the Volume Flow Rate isn't change . Many thanks and Best Regards.
Hoang Su
Gelöst! Gehe zur Lösung