ISO missing instrument Part number

[traiduong014969]

Hi Autodesk Support,

I have a problem with creating bom in isometric. all fitting and instrument have number in bom tabe , however, the instrument was missing part number. You can see picture below. I reference link a post about this problem but it not working for me.

https://forums.autodesk.com/t5/autocad-plant-3d-forum/instrument-angle-psv-valve-bubble-tag-not-show... 

For more clarification refer to the attached setup file

Thanks in advance !

[h_eger · Accepted solution]

Dear @traiduong014969 ,

If you follow this link exactly, it will work with the instruments!

https://knowledge.autodesk.com/support/autocad-plant-3d/learn-explore/caas/sfdcarticles/sfdcarticles... 

[traiduong014969]

Thank you so much, I do follow the guide link step by step, and its working

[popovUS9BY]

Hello,

how you pass through this?

Do you copy this IsoConfig.xml file somewhere so custom parts to appear in iso sketches?

Regards

[traiduong014969]

yep, i folow link Mr h.eger step by step and Its working