HOW TO CREATE A REPORT CONTAINING TOTAL QUANTITIES?

[omar.amohamed]

HOW TO CREATE A REPORT CONTAINING THE TOTAL QUANTITIES OF AN COMPONENT?

EXAMPLE:

I HAVE A MANUAL GATE VALVE SIZE 80 WITH A DIFFERENT TASG NUMBER

GV-01 / GV-02 / GV-03

I WANT TO CREATE A REPORT THAT CALCULATES THE TOTAL NUMBER OF GATE VALVES THAT HAS THE SAME SIZE

SO OUTPUT SHOULD BE >> GATE VALVE - SIZE 80 - QTY: 3

COULD BE ACHIEVED BY PLANT 3D ITSELF? AND IF NOT, PLANT REPORT CREATOR HAS THE ABILITY TO ACHIEVE THAT?

[George.Endrulat]

It depends on how formal and frequent you need the data, if it's informal and seldom you can use datamanager and export it to excel and do whatever you want, including totals.  If it's formal, a deliverable, and often generated you'll want to do it in report creator.  Report creator is somewhat complicated, I would recommend getting trained in it to fully utilize it.

[omar.amohamed]

YES, I WANT TO EXPORT TOTAL DIRECT FROM PLANT 3D LIKE IN REVIT.

[rajendra.prajapat]

@omar.amohamed You can get it by data manage. use pivot table in exported excel to get the data in your format.

[Gokhan_Kaya]

Hi

which one report  PİD  or 3d ?

[omar.amohamed]

PID

[Gokhan_Kaya · Accepted solution]

Hi

I create new report file Valve list with qty

I am not test this report

Before using this file, be sure to check that it works correctly

compare data from report with datamanager

NOTE: There may be omissions and inaccuracies in the report. Please check and use 

[omar.amohamed]

Thanks a lot, it worked.

Could you recommend me an advanced tutorial for P3D report creator?

[Gokhan_Kaya]

Hi I have not any documents sorry