Text insertion point problem

[Anonymous]

Text insertion point problem. The cursor blinker has a triangle that makes editing the text all wrong 

[imadHabash]

does this happened in general or just in a certain mtext ? if in a certain one please could you attache it here ?

[Anonymous]

Only in some of them. If I copy the text to another application and copy it back its gone. I have attached a dwg

[imadHabash]

Yes .. i noticed that also !! but if you select all the text ( Ctrl+A ) then right click and select Remove Formatting , any changes ? it's work with me . 

[Anonymous]

It didnt work 

[imadHabash]

would you please open and test attached file ? ( be careful i add numbers  ) 

[Anonymous]

the problems not there anymore. Its odd that I cant fix my drawing. I dont know what it is

[imadHabash]

---

@Anonymous wrote:

the problems not there anymore. Its odd that I cant fix my drawing. I dont know what it is

---

Cool ... make sure that you select all the mtext and remove formatting . 

[Anonymous]

It doesnt fix the problem in my drawing

[imadHabash]

BTW ... as additional action , make sure that your AutoCAD version is up to date .  >> Click <<

[vinodkl]

Hi,

Edit the text and select all and then change the font to a different one like arial narrrow and then back to Arial. See if this fixes your problem.

[imadHabash]

---

@Anonymous wrote:

It doesnt fix the problem in my drawing

---

when you remove formatting , your text respond or not ? 

[Anonymous]

Changing the font works. But I cant go around like 50 different text changing the font around. Its going to take me a while to fix this then if theres no other options

[Anonymous]

nothing happens when i format it. It just stays exactly the same

[imadHabash]

---

@Anonymous wrote:

nothing happens when i format it. It just stays exactly the same

---

 i'll prepare a short screencast for you . 

[vinodkl]

Hi,

In that case try this lisp. (check only the font when you run the lisp)

Just incase if your not sure how to load load lisp click here

[imadHabash]

hope it's give a hint .. 

https://autode.sk/2A6UOTl

[Anonymous]

OMG thats way to complicated

[Anonymous]

I have tried this it doesnt work

[vinodkl · Accepted solution]

Hi,

Its not that complicated. 

Type in the command APPLOAD and browse the .lsp which I had attached and then click on load(upon loading you can see a message at the bottom saying "successfully loaded"). close the dialog box

Now type in the STRIPMTEXT and select all the text and press enter then check mark only font and click on ok that's it.