Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
@C.Utzinger hello, have you tried to use full path and attachment when you xref a dwg file. thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
@C.Utzinger hello, please see attached. manage to solved your issue. i dxfout your drawing and dxfin > save > open new drawing > attached as xref no issue. thanks.
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
@C.Utzingerhello, no worries, glad to help. thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
