Problem with reference

C.Utzinger · ‎07-06-2017

Hi

Everytime I Close my drawing and open it again, the attached reference is missing. It shows like not found.

I have no idea why. I have reloaded it 50 times.

I work with AutoCAD 2017.

Please help.

ennujozlagam · ‎07-07-2017

@C.Utzinger hello, have you tried to use full path and attachment when you xref a dwg file. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

C.Utzinger · ‎07-07-2017

HI

I have it like this always, and ervey reference works fine, ist only this one.

I tried for example to copy the drawing in another dwg witch works fine, after that happens the same with this one.

So i think there is a Problem with this drawing :(...

Thank you

ennujozlagam · ‎07-07-2017

@C.Utzinger hello, please see attached. manage to solved your issue. i dxfout your drawing and dxfin > save > open new drawing > attached as xref no issue. thanks.

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

C.Utzinger · ‎07-07-2017

Thank now it works!!!

ennujozlagam · ‎07-07-2017

@C.Utzingerhello, no worries, glad to help. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Community

Problem with reference

Problem with reference

Problem with reference