problem with autocad

[Anonymous]

Hello!

I have a question on how to fix red circels in avtocad. The circels appear when i use tool hatch.

I don`t know how to fix this so i would ask for some help pls.

Thank you for ysyour answers.

[leowarren34]

Hi @Anonymous,

This is the break/community room, a chilled out, non product specific forum, I'll ask the admin to move this thread to the AutoCAD forum.

[Anonymous]

Can you be more specific about your problem?
Submitting a screenshot of the issue may help!

[Anonymous]

Without knowing any other details, I think your issue is that you are trying to hatch areas that do not have closed boundaries.

2 things to try:

You can adjust the >hpgaptol< system variable to allow for area(s) with openings to be hatched, or:

Better idea is to find the gaps in your geometry and close them.

Sometimes AutoCAD can get "confused" if you zoom in & out when you are working on hatching, and "think" that there is a gap when there really isn't. In this case, regen or regenall command should make the red circles go away and allow you to hatch your desired boundary.

Hope this helps.

[S.Faris]

Make sure the area you are trying to hatch is a closed one.

To make this sure, FILLET(radius=0) all the joints/corners, especially the corners/joints where the red circle was shown.

This will help to close any unnoticed gaps.The Hatch command should work for after this.