Line is not connecting to a circle's quadrant

[Anonymous]

i have been snapping a line to a circle' s quadrant but it is not closing. how can i solve this?

[imadHabash]

Hi,

You may need to check your OSNAP modes and make sure that you select your needed ones . it will be great if you can post an image for your issue ?

[Anonymous]

Here's the photo. I made a mistake. it was supposed to be an isocircle's quadrant.

[vinodkl · Accepted solution]

Hi @Anonymous 

I feel the line is snapped to the quadrant, but it looks like that is because of the smoothness of the iso circle. Type in the command "VIEWRES" and set it to "5000" and see if that makes any difference 🙂

[imadHabash · Accepted solution]

Try also Regenall command .

[Anonymous]

i already did it and i even set it to 10000. it actually worked except on the isocircle shown in the image. 

[Anonymous]

it improved the line's quality but it still failed to connect it

[imadHabash]

would you post here your CAD dwg file ( just the part we need to check ) , for testing ?

[Anonymous]

sure. here you go

[vinodkl]

Edited: Ignore this.

[vinodkl]

Looks good on my end. See snapshot below.

Type in the command "3DCONFIG" and see if its turned "on" and check if the "smooth line display" is enabled.

[Anonymous]

it is actually turned on. im surprised that it turned out okay on your end, but i dont know why my display screen shows otherwise

[pendean]

Post a screenshot of your ABOUT and GRAPHICSCONFIG commands pop-ups please.