Community
If you are trying to join a spline to anything the resulting object will become a spline
to get around that make the spline a polyline using PEDIT
Select the Spline and it will ask if you want to turn it into one say yes.
Leave the precision at 10.
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Joins multiple objects without specifying a source object. The rules and resulting object types are as follows:
A line object results from joining collinear lines. The lines can have gaps between their endpoints.
An arc or circle object results from joining coplanar arcs with the same center point and radius. The arcs can have gaps between their endpoints.
Lengthening occurs in a counterclockwise direction. A circle object results if the joined arcs form a complete circle.
A spline object results from joining splines or elliptical arcs together, or to other objects. The objects can be noncoplanar.
A polyline object results from joining coplanar lines, arcs, polylines, or 3D polylines.
A 3D polyline results from joining noncoplanar objects other than curved objects.
I've just copied this from the standard help. I would suggest you check your arcs and see what they are.
Howard Walker
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
