how to change mm to meter??

[Anonymous]

dear all,

           i have one doubt, i make the drawing in meters if i take the dimension  (measurements) that one showing in millimeters. how to change into dimension in meters??

please any one help me to find a solution. herewith  i attached the pic..

[alex101000]

Use correct measurment

or

Realy convert

[Anonymous]

MY SCALE FACTOR AND ALL THINGS ARE CORRECT.. I NEED TO CHANGE MILLIMETER TO METER IN DIMENSION..

[alex101000 · Accepted solution]

Please show a screenshot of the dimension style settings.

[Anonymous]

IF I CHANGE THE MEASUREMENT SCALE INTO 1.0000. IN DRAWING METERS ONLY SHOWING EXAMPLE AS PER DRAWING LENGTH IS (373.892Meters) but after i am changing the measurement scale is showing only (373 Meter)                    then what is the correct standard measurement scale?

[alex101000]

About Units of Measurement

To Specify the Drawing Units

The problem is, one acad drawing unit can be any unit you wish it to be, e.g. 1 acad unit = 1mm, or 1 acad unit = 1 ft.

[jayhar · Accepted solution]

Hi,

You can change Scale factor in dimension style or selecting dimension go to properties below primary units Dim scale linear see the video.

  https://autode.sk/2ynbYvv

or

https://knowledge.autodesk.com/community/screencast/18000cbb-dae5-46f8-938a-18ea9bb7978e

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly. If your issue persists,

Please give me a bit more detail on this issue so we can continue to work towards getting this solved.

Thanks You
Jayhar.M.J

Helpful Links: Prepare your computer for download |  Autodesk Virtual Agent | Clean Uninstall | Steps for Setting-Up Student Software

[dgorsman]

If you take a look at the circled label on the dialog screen shot, it says:

"Units to scale inserted content" (emphasis on inserted)

It means what it says - if the inserted content (i.e. blocks) has units, rescale it by the appropriate factor to show in meters.