Hi!
I was curious if anyone knows how I may be able to make extrusions without the errors shown in my file below. The errors are that when I extrude my surfaces the vertices where two line segments combine overlap and extend too far out and don't form a perfect point/vertex.
In the second file I attached, I thought I may have more luck with extruding the 3d line segments instead of the whole surface. However, I am trying to figure out if there is a way to choose the direction of extrusion (this actually may be my issue above as well).
Anyone know how to change/choose direction of extrusion?
Solved! Go to Solution.
Solved by fatal.error. Go to Solution.
You can achieve that by thickening a solid:
Please see the attached step-by-step file.
I had to adjust my model and now I am having issues converting the faces into surfaces. I have individual polylines. When you said "join 3 dots with a polyline" I am not sure exactly what you meant.
In the past I have converted my model from nodes and polylines to meshes to 3d surfaces, but now I am unable to do so. When I use the convtosurface command, it filters out my objects.
I will attach my file below. Let me know if you have any recommendations. Thank you so much for your help!
Can't find what you're looking for? Ask the community or share your knowledge.