Hello,
here is in attach the plans for a dam that I have to model in 3D, there is also my dwg file so you can see that I did two part of my area which is the number 10, but there is an extension in the area and I can't do it, I would like to connect the two areas with the deviation of the edge but I'm lost, if someone could help it would be great...
thanks!
Hi,
>> my area which is the number 10, but there is an extension in the
>> area and I can't do it, I would like to connect the two areas with
>> the deviation of the edge
I'm not clear understanding your question, but what you are trying to do with Vanilla AutoCAD and 3D-Solids should be done with Civil 3D. There you have the control for assemblies/sub-assemblies, their height and width and super-elevation along an alignment.
- alfred -
Hi,
Since we don't have all the data , i'll give a hint that may help you . try to draw an elevation for your profile then Extrude it as shown below . you have also an option for Path to extrude with .
Imad Habash
Can't find what you're looking for? Ask the community or share your knowledge.