Extracting XYZ coordinates from survey information

[jennifermacleay1]

Hello, 

I asked yesterday regarding extracting the XYZ info and someone had done this for me which was appreciated! 

Although, I don't think all levels spots were accounted for? 

Could someone extract this information for me? Much appreciated! 

[maxim_k]

Hi @jennifermacleay1 ,

---

@jennifermacleay1 wrote:

Hello, 

I asked yesterday regarding extracting the XYZ info and someone had done this for me which was appreciated! 

Although, I don't think all levels spots were accounted for? 

---

It was me.

I exported points once again. There are 4931 points in your drawing. Is this correct?

Look at the file in the attachment.

[jennifermacleay1]

Ah, apologies. I think the issue is on my end - I need to format the text so it's not in columns and rows. Do you know a fast way of doing this?

So it reads as below for example - [tab] is where a tab space needs to be entered.

360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00

Thank you for your help!

[maxim_k]

Hi @jennifermacleay1 

---

@jennifermacleay1 wrote:
 I need to format the text so it's not in columns and rows. Do you know a fast way of doing this?

So it reads as below for example - [tab] is where a tab space needs to be entered.

360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00

....

---

If you need TAB as separator instead of comma, you can use attached LISP (PTEXPORT command after you APPLOAD it).

I also attached the result.

[jennifermacleay1]

Maxim - thank you so much for your help. 

Could I ask you to extract the XYZ from the attached file? [I've removed the levels text shown in the previous DWG as they have xyz coordinates set to them which need omitting to allow only the spot levels to be extracted].

Sorry for all the back and forth and thank you again! 

[jennifermacleay1]

Maxim, thank you for this.... I seem to have replied to myself!

Could I ask you to extract the XYZ from the attached file? [I've removed the levels text shown in the previous DWG as they have xyz coordinates set to them which need omitting to allow only the spot levels to be extracted].

Sorry for all the back and forth and thank you again! 

[maxim_k]

Hi @jennifermacleay1 ,

---

@jennifermacleay1 wrote:

......

Could I ask you to extract the XYZ from the attached file? ....

---

Here it is.