Extracting XYZ coordinates from survey information

Extracting XYZ coordinates from survey information

jennifermacleay1
Explorer Explorer
517 Views
6 Replies
Message 1 of 7

Extracting XYZ coordinates from survey information

jennifermacleay1
Explorer
Explorer

Hello, 

 

I asked yesterday regarding extracting the XYZ info and someone had done this for me which was appreciated! 

 

Although, I don't think all levels spots were accounted for? 

 

Could someone extract this information for me? Much appreciated! 

 

 

0 Likes
518 Views
6 Replies
Replies (6)
Message 2 of 7

maxim_k
Consultant
Consultant

Hi @jennifermacleay1 ,

 


@jennifermacleay1 wrote:

Hello, 

 

I asked yesterday regarding extracting the XYZ info and someone had done this for me which was appreciated! 

 

Although, I don't think all levels spots were accounted for? 

 

 

 


It was me.

I exported points once again. There are 4931 points in your drawing. Is this correct?

Look at the file in the attachment.


Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Likes
Message 3 of 7

jennifermacleay1
Explorer
Explorer
Ah, apologies. I think the issue is on my end - I need to format the text so it's not in columns and rows. Do you know a fast way of doing this?

So it reads as below for example - [tab] is where a tab space needs to be entered.

360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00

Thank you for your help!
0 Likes
Message 4 of 7

maxim_k
Consultant
Consultant

Hi @jennifermacleay1 

 


@jennifermacleay1 wrote:
 I need to format the text so it's not in columns and rows. Do you know a fast way of doing this?

So it reads as below for example - [tab] is where a tab space needs to be entered.

360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00
360000.00[tab]360000.00[tab]360000.00

....

If you need TAB as separator instead of comma, you can use attached LISP (PTEXPORT command after you APPLOAD it).

I also attached the result.

 


Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Likes
Message 5 of 7

jennifermacleay1
Explorer
Explorer

Maxim - thank you so much for your help. 

 

Could I ask you to extract the XYZ from the attached file? [I've removed the levels text shown in the previous DWG as they have xyz coordinates set to them which need omitting to allow only the spot levels to be extracted].

 

Sorry for all the back and forth and thank you again! 

0 Likes
Message 6 of 7

jennifermacleay1
Explorer
Explorer

Maxim, thank you for this.... I seem to have replied to myself!

 

Could I ask you to extract the XYZ from the attached file? [I've removed the levels text shown in the previous DWG as they have xyz coordinates set to them which need omitting to allow only the spot levels to be extracted].

 

Sorry for all the back and forth and thank you again! 

0 Likes
Message 7 of 7

maxim_k
Consultant
Consultant

Hi @jennifermacleay1 ,

 


@jennifermacleay1 wrote:

......

Could I ask you to extract the XYZ from the attached file? ....


Here it is.


Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Likes