Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have a single line diagram where the components are arranged from top to bottom on my drawing. I tried to do a component retag and ACADE updated but from left to right, so my top CB was labelled Q15 but should be Q1. I tried changing the 'Tag/Wire Number/Wire Sequence Order' drop down on the 'Drawing Format' tab of Drawing properties to 'Top to Bottom. moving right' but that did not change anything. Am I missing something here?
Have you tried sort order option "Left to right, moving down (default for vertical ladders)". Are you using X-Y grid Reference Numbers for format referencing?
Ramesh Kambang Aerospace System/Design Engineer and eVTOL/EWIS Expert EASA 21J, UK 21J, MAA DAOS, Certification Specification CS23-29, CS-ANCS, CS-STAN and EVTOL Please select "Accept Solution" if this post answers your question.
