Wind Simulation on Robot structural Analysis

[Anonymous]

Dear Concerned,

I did two simple wind simulation on Robot Structural analysis, I am getting two different values

1) the first simulation was the same building, wind speed 50 m/s without cladding

2) the second simulation was the same building, wind speed 50m/s, with cladding.

So am posting this message, to know if we should put the cladding before or after the simulation to obtain correct values for wind pressure.

Thanks in advance

 @Anonymous Artur Kosakowski marked the post as the solution. If it did not work as an answer, please post your reply in this thread so that I can unmark the solution. 

[Artur.Kosakowski · Accepted solution]

Hi @Anonymous

If the wind acts on walls (claddings) then before; if not after 

If I managed to answer your question(s) press the Accept as Solution button please. This will help other users to find solution(s) much faster. Thank you.