Sensitivity coefficient ''theta'' EC8

[Michele100100]

Hello,

I need to check Sensitivity coefficient ''theta'' EC8. I have a simple steel structure..4 columns and 4 primary beams + purlins. It is for a parking bay. How can I get out the reduced forces? I would know how Can I see in robot the Vtot of this formula:

If it is possible. Or if there is an automatic way to check Theta coefficient directly with the software.

Many Thanks,

Michele

[Simau]

@Michele100100 

Use Structure story then Results>Diagram for builings you'll get what you need to calculate Theta

[Michele100100]

Hello,

many thanks, is exactly what I was looking for, but the only result that I can get out in my model is the drif dr.

Ptot and Vtot are not shown. 

What can be the problem??

Thanks

[Simau]

@Michele100100 

Ptot = Fz

Vtot = Fx or Fy depending on seismic direction

[Michele100100]

Not forces are shown in my model, whatever combination I select, I cant see forces. If I see diagram, everything is shown, but Diagram for building is not working. I dont know why.

Many thanks

[Simau]

Could you share your model

Zip it before.

[Michele100100]

My model attached.

[Simau · Accepted solution]

You must create "story" first

Model attached

[Michele100100 · Accepted solution]

thanks.