Robot Structural Analysis Results of load combinations

[ahmed.kamelTT2HV]

Hi,

I've made a model using Robot Structural Analysis, includes some loads, nodal loads, modal analysis and response spectrum cases, I have an issue in showing the envelope values of any straining action or displacement for a set or all load combinations, I only can see the result for each load combination but no envelopes. Any Ideas what I am missing?!

[Krzysztof_Wasik]

Hi @ahmed.kamelTT2HV 

Check if results for each combination are available. If they are available for each combination zip and share model for verification.

[ahmed.kamelTT2HV]

Hi Krzysztof Wasik,

Yes the results for each load combination is available. please find attached the zip.

Thank you!

Ahmed 

[Krzysztof_Wasik · Accepted solution]

HI @ahmed.kamelTT2HV 

It seems that model structure is corrupted. 

Repair your model by copy/paste all objects to new empty project  in second opened Robot instance 

[ahmed.kamelTT2HV]

It looks strange for me to have this type of error or corruption, and seemingly is impossible to know the reason so it can be avoided in future, anyway, I applied what you proposed and it works! if you have in recommendations to avoid this issue in the future, kindly inform me.
Thanks for your support!
kind regards,
Ahmed

[Krzysztof_Wasik]

Hi @ahmed.kamelTT2HV 

I cannot reproduce the way model was created.

Since each of combination is defined four or five times, I guess that you could youe some not typical workflow for model generation.