Robot's not letting me create things

Robot's not letting me create things

Anonymous
適用対象外
1,505件の閲覧回数
21件の返信
メッセージ1/22

Robot's not letting me create things

Anonymous
適用対象外

I need some help because I haven't found anything on the internet that resembles what's happening to me. This is my first time using this software, but the program won't let me create anything at all!!!! I can't create bars. I put the beginning point and then when I clik the end and nothing happens!! It doesn't create the bar, but there's no error. Also, I was only able to create one column, then it didn't let me create anything else. I tried on 2D frame, on building analysis and... well, nothing!!! I'm trying reinstalling, but any ideas on the topic would be super helpful!!!!

0 件のいいね
解決済み
1,506件の閲覧回数
21件の返信
返信 (21)
メッセージ2/22

Artur.Kosakowski
Autodesk Support
Autodesk Support

Try to attach a movie that shows what is happening while you start using Robot so that we have a better understanding of a situation. 



Artur Kosakowski
0 件のいいね
メッセージ3/22

Mirko.Jurcevic
Collaborator
Collaborator

Try to reduce display acceleration slider.

Set it as shown in the picture.

If this solved your issue, please Accept it as Solution help other forum users with similar issues to find answers easily.
  
Mirko Jurcevic


My blog: www.engipedia.com
Try my Revit add-ins: Autodesk App Store
0 件のいいね
メッセージ4/22

Anonymous
適用対象外
I can't make a video, I don't have any software for that... And there's not
much to see anyway. With columns I can create just the one. When I click to
create another, it just won't let me, it won't do anything. With I click on
the icon of bars, the dialogue box where I can pick the materials and
sections appears, and I can click for the beginning of the bar, but when
I'm going ti click the end point, it won't do anything again. It's like the
program doesn't realize I'm clicking everywhere to try to create the bar...
It's super weird
0 件のいいね
メッセージ5/22

Anonymous
適用対象外
I have no idea what you mean by that... :S I'm a total newbie...
0 件のいいね
メッセージ6/22

Anonymous
適用対象外

I think I just understood what's happening. Everything I create (I tried creating objets like arcs and circles), it doesn't matter where I click it's like I'm only doing it on one point, which is 0,0... Hmmm, this is hard to explain... The beginning and ending point of everything is 0,0!! It's doesn't matter if I specify something completely different. I create a node, it goes to 0,0. I create a column, it goes to 0,0. I create a bar, the beginning and end point is 0,0. That;s why I can't create anyhting...

 

Any ideas on how to fix this?????????

0 件のいいね
メッセージ7/22

Mirko.Jurcevic
Collaborator
Collaborator

Here, download Jing. It's free software for screen recording:

http://www.techsmith.com/jing.html

Try to record what you've been doing and share the video.

If this solved your issue, please Accept it as Solution help other forum users with similar issues to find answers easily.
  
Mirko Jurcevic


My blog: www.engipedia.com
Try my Revit add-ins: Autodesk App Store
0 件のいいね
メッセージ8/22

Anonymous
適用対象外
Try Creating Axis system first, you should be able to see the Grid Lines. Then try to model along those lines.
0 件のいいね
メッセージ9/22

Anonymous
適用対象外
ok so I did it, thank you for the software suggestion

Here's the link to the video. Thank you for your help
http://screencast.com/t/rNPE8AKZO6Q
0 件のいいね
メッセージ10/22

Anonymous
適用対象外
I already tried that, it still does the same thing
0 件のいいね
メッセージ11/22

Mirko.Jurcevic
Collaborator
Collaborator

Try to delete contents of CfgUsr folder.

Turn Robot off before that.

 

CfgUsr folder location:

C:\Users\"yourUserName"\AppData\Roaming\Autodesk\Autodesk Robot Structural Analysis 2014\CfgUsr

If this solved your issue, please Accept it as Solution help other forum users with similar issues to find answers easily.
  
Mirko Jurcevic


My blog: www.engipedia.com
Try my Revit add-ins: Autodesk App Store
0 件のいいね
メッセージ12/22

Anonymous
適用対象外
What do you mean by turn off?? Close the program?? (I'm sorry, I'm not
really good with computers)
0 件のいいね
メッセージ13/22

Anonymous
適用対象外

Yes. He means to close the Robot first before you delete those files.  [Copy those files as backup for later reference.]

 

Here is the screenshot of the contents of that folder. My Robot is working fine, so check with your folder.

 

I dont know what these files contains except that  some of them has color and font information for the Robot. I am curious to know though. 

 

1.jpg

0 件のいいね
メッセージ14/22

Anonymous
適用対象外
Well, it didn't work... 😞 Robot's driving me crazy...
0 件のいいね
メッセージ15/22

Mirko.Jurcevic
Collaborator
Collaborator

Have you tried to manually enter Beginning and End coordinates?

Enter coordinates and click "Add". 

For example:

5 ; 3

15 ; 4

Add

If this solved your issue, please Accept it as Solution help other forum users with similar issues to find answers easily.
  
Mirko Jurcevic


My blog: www.engipedia.com
Try my Revit add-ins: Autodesk App Store
0 件のいいね
メッセージ16/22

Mirko.Jurcevic
Collaborator
Collaborator

And please, tell us your computer hardware configuration.

Is that Windows 8 you're using?

If this solved your issue, please Accept it as Solution help other forum users with similar issues to find answers easily.
  
Mirko Jurcevic


My blog: www.engipedia.com
Try my Revit add-ins: Autodesk App Store
0 件のいいね
メッセージ17/22

Anonymous
適用対象外
Try creating nodes (by clicking once and by manually giving coordinates once) at some locations and see whether they are being created or not .
0 件のいいね
メッセージ18/22

Artur.Kosakowski
Autodesk Support
Autodesk Support
Well, it didn't work... 😞 Robot's driving me crazy...
1. Geometry > Structure Type > select a shell model (silo)
2. Geometry  > Structure type > select the model type you want to work with (2D frame / 3D frame)
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

 

 



Artur Kosakowski
0 件のいいね
メッセージ19/22

Anonymous
適用対象外

My computer has Windows Home 7, 64-bit. It's a Toshiba Satellite if that helps

0 件のいいね
メッセージ20/22

Anonymous
適用対象外

Yes, I also tried that and didn't work. Creating nodes doesn't help either because it only creates one node in 0,0, again...

0 件のいいね