Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
After I've updated a version of ROBOT the Change of reinforcement in required reinforcement module seems to not work properly or I am missing something. I've got a beam of which deflection is exceeded. I increase required reinforcement area and click apply. After I press verify, number of bars goes back to what it was before I've changed required area and deflection stays untouched.
M. Agayr Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I never used requiered reinforcement with previous Robot releases. With Robot 2025, i got same behaviour as you.
M. Agayr Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yesterday I have tried installing all available versions from 2025 up to 2022 to check for this issue. Every single version of Robot has this. This is so weird... I had an old version of 2017 and it worked fine over there. I will probably try to contact Autodesk tech support and see, whether they have any solutions to this.
