RC Continuous footing reinforcement editor shows blank page

[Anonymous]

Hi Robot Team

Best greetings

 My issue that I used a rectangular bars as a continuous foundation in some models, I calculated the provided reinforcement in RC module, but when I want to generate the reinforcement edition for this foundations  I get a blank screen, how can I fix this problem?  

@Anonymous Artur Kosakowski edited the topic for better findability 

[Artur.Kosakowski]

Please check this topic

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Anonymous]

Thank you very much Mr. Artur,
But I don't mean this type of drawings. what I mean is the reinforcement
edition like that specific for beam, columns, so user can add sections,
extract reinf. table, etc,


Virus-free.
www.avast.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

[Artur.Kosakowski]

I'm not sure if I understand the situation correctly. Are you able to produce such drawing but you want to edit it or you can't generate it at all?

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[khimpitou]

Rc providiced reinforcement modul just verify the reinforcement member only not been designed, try designed reinforcement modul instead. 

[Artur.Kosakowski]

---

@khimpitou wrote:

Rc providiced reinforcement modul just verify the reinforcement member only not been designed, try designed reinforcement modul instead. 

---

Actually Provided Reinforcement modules generate reinforcement distribution in an element. The Required ones don't. 

[khimpitou]

😂😂😂

[Anonymous]

Dear Mr, Artur

What I mean is this :is this possible in foundation as I beams & columns ?

[Artur.Kosakowski]

I do apologize but I'm still not sure if I understand you correctly. Could you attach a sketch of what you need? Thank you.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Anonymous]

Dear senior Artur Kosakowski  

Please, see this photo and you certainly will understand my issue

this photo shows  the reinforcement details of a beam by pressing the " Reinforcement Edition" tab in Robot(I don't mean the drawing icon located on the right side of the screen), for beams and columns this is easily done, but when I want to do this for continuous grade beams( ground beams) I always get blank screen without any details for reinforcement , I don't know if this supported by Robot or not , if  Yes, please tell me how to fix the problem?

Best respects    

[Artur.Kosakowski · Accepted solution]

I'm very sorry but I missed your post 

This reinforcement editor layout is available for RC Beams only.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Anonymous]

Thanks Artur, is there intention to make this editor more  wider to include the ground beam reinforcement 

[Artur.Kosakowski]

I'm sorry but I will not be able to discuss any future plans topics on this forum.