Material Properties (API)

[Anonymous]

Hi,

Is there any way to get tabulated data for all of the materials in the Robot database?  I searched in the program files / Robot 2013 but can't find it easily.  

Thanks,

Tony

[Artur.Kosakowski]

Hi @ledinhchinh0409

I'm not a SNIP expert but if you use different concrete grades than specified by this code the calculated values of resistance may be not as you expect them to be. Perhaps @Romanich will be able to provide you with the better input on the SNIP principles. 

[Romanich]

Hi @ledinhchinh0409

I think in your case you have Rb = 13 * 0.9 (gamma b 2) = 11.7 MPa  that approximately equal to 11.5 MPa in the report

[ledinhchinh0409]

Hi. @Romanich

Thank @Romanich for the reply.

But that's the B20 parameter.

[Romanich]

Xin chào @ledinhchinh0409,

I don't understand the issue:

[ledinhchinh0409]

Hi @Romanich

Thanks for the quick reply.

I mean: RSA does not update data when calculating reinforcement.

B20 and B22.5 are exactly the same.

[Romanich]

Hi @ledinhchinh0409,

As you may note there no concrete grade B22.5 in the Robot list:

You have to use existing concrete grades.

[ledinhchinh0409]

hi.

Thank you @Romanich!

 This definition was not accepted by RSA.

Is there a way I can define B22.5?

[Romanich]

In the previous posts @Artur.Kosakowski gave you a comprehensive answer regarding this behavior of the Robot.

[ledinhchinh0409]

Thank you @Romanich for spending time with me.Hi. The solution is acceptable.

[Anonymous]

Hello @Rafal.Gaweda

I think there is a flaw in the enum IRobotMaterialType.I_MT_ALL

It doesn't work, but I_MT_STEEL does for instance.

Right?

---

@Rafal.Gaweda wrote:

API, API, API...

Gift for You attached - whole database to Excel.

If you want only concrete materials  :

replace

Set RNA = RobApp.Project.Preferences.Materials.GetAll

by

Set RNA = RobApp.Project.Preferences.Materials.Get(I_MT_CONCRETE)

---

[Nuraan]

Hi

Is this screencast available in another format? Flashplayer is retired since last year.