Information about assemblies

[Anonymous]

Good morning, everyone,

I have a big question about manual calculation in assembly.
Indeed, when I look at the distribution of moments in my spreadsheet, it seems incorrect to me.
I changed the sign of my moment +/- but the distribution is the same. My highest moment starts at the first row of bolts for the + sign, but should be reversed for the - sign, which is not the case.

Please can you inform me, see atttached files 
Thank you very much.

[Artur.Kosakowski]

Hi @Anonymous

Could you attach the Robot file with the connection and indicate the part of the calculation notes to look at?

[Anonymous]

Thank you for your quick answer 

You can look at the assembly 26  and reach the shear resistance for assembly 

See the attached png files for summary 

thank you again 

[Artur.Kosakowski · Accepted solution]

Hi @Anonymous

The row numbering starts with the bolt that is the farthest from the center of rotation rather than from top to bottom as par a connection view.

If I managed to answer your question(s) press the Accept as Solution button please. This will help other users to find solution(s) much faster. Thank you.