Wall pocket

[Anonymous]

Having a brain lock. Want to cut 1' deep 18x18 pocket in top of foundation
wall.

Thanks
bob v

[Anonymous]

You can use a void object and the cut geometry tool.

--
Jeff Hanson
Autodesk Product Support
Building Solutions Division
Manchester, NH
_____________________________

"Robert Vetrano" wrote in message
news:5259196@discussion.autodesk.com...
Having a brain lock. Want to cut 1' deep 18x18 pocket in top of foundation
wall.

Thanks
bob v

[Anonymous]

Problem is it is a corner and there are 2 walls to deal with. I used Create
and created a Structural Foundation Void Object. It cuts only one wall do I
have to make 2 objects?

Thanks
bob v
"Jeff Hanson (Autodesk)" wrote in message
news:5259246@discussion.autodesk.com...
You can use a void object and the cut geometry tool.

--
Jeff Hanson
Autodesk Product Support
Building Solutions Division
Manchester, NH
_____________________________

"Robert Vetrano" wrote in message
news:5259196@discussion.autodesk.com...
Having a brain lock. Want to cut 1' deep 18x18 pocket in top of foundation
wall.

Thanks
bob v

[Anonymous]

You could edit profile both walls.

David Haynes
Ideate, Inc.
www.ideateinc.com

"Robert Vetrano" wrote in message
news:5259196@discussion.autodesk.com...
Having a brain lock. Want to cut 1' deep 18x18 pocket in top of foundation
wall.

Thanks
bob v

[Anonymous]

Actually thats what I figured would be the easiest.

Thanks
bob v
"David Haynes - Ideate" wrote in message
news:5259625@discussion.autodesk.com...
You could edit profile both walls.

David Haynes
Ideate, Inc.
www.ideateinc.com

"Robert Vetrano" wrote in message
news:5259196@discussion.autodesk.com...
Having a brain lock. Want to cut 1' deep 18x18 pocket in top of foundation
wall.

Thanks
bob v