RVT22-Column &Beams transfer between RVT & AdvanceSteel

[AntDrt]

Hello everyone,

got a issue with the link between RVT2022 & AdvanceSteel 2022

i'll use these terms :

> FF (fabrication form) : steel element ( column or beams) with steel element applied to them ( connection / weld / bolts)

> CF (classical form) : native steel element (no connections applied to them)

there my issues:

> Column orientation  : 

   For CF element when i export from RVT to AS, profiles are rotated to 90° in AS 

   for FF elements, good orientation in AS

See below:

Columns in revitColumn in AS

> Beam with offset:

   for CF element, when i export from RVT to AS, offset are in wrong value (ex: -20 is set to +20)

   for FF elements, good offset set in AS

See below:

RVT beamsAS beams

Orientation & offset seems to be related to the fabrication form.

Does anyone can reproduce this issue on his side ?

i attach the RVT22 model / the AS22 model / the .SMLX file

[AntDrt]

update: 2021/04/21

got a feedback on AS forum, and before installing 2022 version, 2021 exports well, but after installation of 2022 version 2021 export seems buggy now.

got a feedback only on orientation problem, not offset currently.

[AntDrt]

hi again, 

update from AutodeskSupport:

Columns with user section are rotated 90 or 180 degree in Advance Steel after import them from Revit...

but it isn't related to my problem, it is not user sections and i've tried with US AISC 14.1 U sections from the "load autodesk family" function in revit.

And problem is still present. see below:

default US Based family RevitUS family AS

it has to be fixed ASAP, and from AS forum it seems to corrupt previous version (20/21..)

[AntDrt · Accepted solution]

update 2021-04-30

After reinstalling Microsoft Acess Database Engine 2010, problem seems to have diseappear. 

[mihai.sandu · Accepted solution]

Created an AKN article from this issue:
https://knowledge.autodesk.com/community/article/357262