Linked Revit Models Disappear when Zooming/ scrolling

[Anonymous]

I have a linked in model and I have set its settings so that it appears halftone in my elevational views. I have set-up and applied this template to all my views. The issue I have is when I go to or zoom of pan the linked model disappears. This is how it should appear. But it simple disappears if zoom or pan.

[ElrinaM]

Hi andydyer

This is a setting in Revit to allow better performance during pan/zoom and orbit. You can switch it off by opening Revit Options from the applications menu. Switch off the highlighted setting below: (You will have to reopen the model for the setting to apply)

[Anonymous]

Elrina

I did that but it still does the same.

[ElrinaM]

Hi again.

Try disabling the other option?

Remember to close and reopen the project after changing the setting.

Does the link reappear after you stopped zooming/panning?

[Anonymous]

I didn't have that option. I did turn off 'hardware accleration' and that worked. 

Thanks

[ElrinaM · Accepted solution]

Hi

This option is only available from Revit 2018.

Glad that disabling Hardware acceleration worked.

[Anonymous]

I have similar effects, but that occurs when I have set Model Display to hidden line and my view range is set in or above the floor above. When I zoom, all the archatecture is shown, but when I stop zooming walls etc disappears.

Soluction is to set view range to below the floor above, or te set Model Display to wireframe.