How to show beam hidden line in floor plan

[shuaib009]

How can I show beam (RB) hidden line in floor plan. My view range is at mid of window.

The desired output should be as below.

[ArmanMargaryan · Accepted solution]

Have you tried these options?

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2021/EN...

https://knowledge.autodesk.com/support/revit-lt/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/Revi...

[ennujozlagam]

you can try linework. thanks

[ennujozlagam · Accepted solution]

or you can try filter per view? here is the example. thanks

[shuaib009]

Thanks @ennujozlagam @ArmanMargaryan .

However, I used Regain plan tool to show the beam in plan then I changed beam appearance changing beam line to hidden in visibility/graphics setting. It worked fine for me. thank you.

[ennujozlagam]

good that's another way to do it, create a plan region set the view range and VG change the line to hidden. thanks😉

[shuaib009]

accept my solution. thanks. 😂 😜

[XSXCHU001]

I have a similar issue. My beam system boundary line is visible when I click on it but when I want to use it as a reference it only shows the beams that run within it. I want the boundary line to show. Please assist

[jay_colcombe]

It is not possible - you can turn on Location Lines for the Structural Framing member within the Beam System but not the Boundary Lines