How to Share Cloud Based Structural Analysis

[ouspensky]

Hi again,

I am still trying to learn how to use all the structural analysis tools in Revit.  I just built a concept model of my building and sent it to cloud structural analysis and it failed.  Is there a way to post a link and share my cloud-based analysis so that someone else can open it and see what went wrong?

Thanks

[teodorb]

Hi @ouspensky,

Could you please attach the model you are trying to analyze?

Kind regards,

[MostafaElashmawy · Accepted solution]

You can click on sharing and add an email for some one to have access to the results or download the pdf rep[ort

[ouspensky]

Please send me your email address by Private Message so I can share my model with you from Autodesk360 Structural Analysis

[ouspensky]

Hi I read the PM,

1) it was my intention that the braces were braced by the shear walls.

2) I uploaded the model

[ouspensky]

This post is related. I used a custom material in the model which failed analysis, please have a look: https://forums.autodesk.com/t5/revit-structure-forum/glulam-material-physical-asset-parameters-expla...

[teodorb · Accepted solution]

Hi @ouspensky,

When I firstly try to open the analytical model settings I get this warning:

After closing this warning, you can go in the Analyze tab, Analytical Model Panel and press the arrow from photo below:

Check the following options:

Go to Mange Tab, Inquire Panel and press Warnings. You will see that a lot of warnings (more that 4000) come from the analytical model:

Kind regards,

[ouspensky]

I followed these directions and now there are no errors during checking and the model still fails in cloud analysis.  I send the you the link and I uploaded the updated model

https://structuralanalysis.360.autodesk.com/Project/2b337a498ada47318f08b2084a151e76?model_id=57661a...