Community
I am trying to set a parameter for how for the nozzle is from the center of the tank but there does not seem to be a way to do this. I got the angle parameter to work just fine. The nozzle is a child family I loaded in. I tried aligning each axis of the nozzle to the axes of tank and I got it work in one quadrant calculating the distances with sin and cos, but Revit doesn't like negative length parameters, I guess.
i was going to suggest using a Reference Line (Ref Lines can be arc's and circles) with a parameter to adjust the radius... But when i tried it, i couldn't get the Nozzle to lock to the Circle Rev Line ☹️.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
hmmm I'm stumped for now... i removed a couple formulas for testing and if I edit the parameters manually, by electing the nozzle and picking the dimensions, it works. When i try to use the parameters using the Type settings it breaks.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Linier Dimensions and Circles don't work well together LOL. Hopefully someone else will chime in with other options/opinions....
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
