Can global parameters be transferred to another project?

Can global parameters be transferred to another project?

dc
Advocate Advocate
2,032 Views
10 Replies
Message 1 of 11

Can global parameters be transferred to another project?

dc
Advocate
Advocate

Can global parameters be transferred to another project?

0 Likes
Accepted solutions (2)
2,033 Views
10 Replies
Replies (10)
Message 2 of 11

RobDraw
Mentor
Mentor

Have you tried?


Rob

Drafting is a breeze and Revit doesn't always work the way you think it should.
0 Likes
Message 3 of 11

dc
Advocate
Advocate

I haven't, yet. I started by looking in the help. By asking here, I'm hoping not to bootstrap, which is how I've learned everything I know in Revit.

0 Likes
Message 4 of 11

iainsavage
Mentor
Mentor
Accepted solution

Yes, use Transfer Project Standards.

0 Likes
Message 5 of 11

dc
Advocate
Advocate

Thanks. If the help had a pointer to that...but that's Revit.

0 Likes
Message 6 of 11

iainsavage
Mentor
Mentor
Accepted solution
0 Likes
Message 7 of 11

dc
Advocate
Advocate

Thank you for showing that to me. However, it's not shown here:

Global Parameters | Revit Products | Autodesk Knowledge Network

0 Likes
Message 8 of 11

iainsavage
Mentor
Mentor

Transfer Project Standards is not specifically related to global parameters, it is the go-to for copying just about anything (a few exceptions) from one project to another or to/from a template file.

If you ever think "How could I copy "x" from file A to file B?" or "How can I update my file to reflect recent changes to my template?" then the answer is probably Transfer Project Standards.

Use it with care though because it might overwrite settings that you don't want to change:-

  • always "check none" when you start the command
  • always check that the "copy from" is pointing to the correct source file
  • then selectively check the categories which you want to transfer
  • if prompted to allow new only or overwrite existing, consider carefully

It really hurts when you realise you've transferred all of the settings from a linked architect's file instead of your template file and you've overwritten everything.

0 Likes
Message 9 of 11

dc
Advocate
Advocate

That would hurt. I would hope to see a hyperlink to the Transfer page in the "related" part of the Global Parameters page.  Thanks for the expanded response and heads-up!. 

0 Likes
Message 10 of 11

HVAC-Novice
Advisor
Advisor

One drawback is that it transfers EVERYTHING from that category, which can clutter up the project you transfer to. 

 

If I only want to transfer selected items of a category, I transfer into an empty project. There I purge all the unneeded items in that category, and transfer from there into the final project. 

 

It would be nice if you could select which items exactly to transfer instead of all or nothing. 

Revit Version: R2026.2
Hardware: i9 14900K, 64GB, Nvidia RTX 2000 Ada 16GB
Add-ins: ElumTools; Ripple-HVAC; ElectroBIM; Qbitec
Message 11 of 11

lenka_kovalcikovaVV4H3
Community Visitor
Community Visitor

The answer is JOTools - Transfer Single

0 Likes