WANT TO CHANGE FLOORING LAYER AUTOMATIC/CONTROL BY PARAMETR WITHOUT CREATING ANOTHER TYPE.

[sudip.bhuniaMT2GQ]

Hi,

 I want to create flooring like " Vitrified tile Flooring"( Vitrified+Morter-35mm or Adhesive-6mm). I do not want to create another type because of support materials(Morter or Adhesive). I want to control by parameter. 

Need Help.

Thanks in advance,

 Sudip

[ToanDN]

Do what you don't want to do - create another type.

[sudip.bhuniaMT2GQ]

Dear ToanDN,
Thanks for your reply. Yes, I do not want to create another type. Trying to do it by any Parameter. Need help.
Thanks in advance,
Sudip

[fkp7057]

https://forum.dynamobim.com/t/how-to-get-revit-wall-structure-properties-with-dynamo/25667/6

By Dynamo You can set wall structure layer. Refer above link

[sudip.bhuniaMT2GQ]

Hi,
I want both options in a single type without creating another type. Like Drop Down or family type option.
Because both are used in the same project.

Thanks,
Sudip

[ToanDN]

Why can't you have both types in one project?

[Mike.FORM]

as @ToanDN stated you need to create a new floor type. This would work the exact same way as a family type dropdown or a type list and it would be in the floor families section of the project browser or when you select a floor in model you get a type drop down in properties.

You other option is to create the structural floor/framing as one floor and then make secondary floor types for all your different finishes and put it on top of the structural floor.

[sudip.bhuniaMT2GQ · Accepted solution]

Thanks for your response, But sorry to say, I am not happy with both solutions. 

Thanks again.