Wall opening extend to roof when height is above 1500 mm (in my case)

Anonymous · ‎09-11-2020

Hi.

When I create a wall opening and set try to set the height to 2100 mm the opening extend to roof automatically although the height still says 2100 mm. I noticed that in my case this happens when I enter a height above 1500 mm. This only happens on the floor below the roof - no problem on other floors.
(see pictures before and after)

Please help.

/Anton

_Vijay · ‎09-11-2020

Its Join Geometry Issue may be...try delete and try to draw new wall …

Vijayakumar
Head of BIM
Did you find this post helpful? Feel free to like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

_Vijay · ‎09-11-2020

Still issue is same try to share the sample model.

Vijayakumar
Head of BIM
Did you find this post helpful? Feel free to like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Community

Wall opening extend to roof when height is above 1500 mm (in my case)

Wall opening extend to roof when height is above 1500 mm (in my case)

Wall opening extend to roof when height is above 1500 mm (in my case)