Community

Wall layers at different height constraints??? How?

Wall layers at different height constraints??? How?

Anonymous
Not applicable
1,390 Views
5 Replies
Message 1 of 6

Wall layers at different height constraints??? How?

Anonymous
Not applicable
‎01-23-2020 02:03 AM

Dämmung Hohe.jpg

0 Likes
Like
Report
Accepted solutions (2)
Solution 1
Solution 2
1,391 Views
5 Replies
Replies (5)
Message 2 of 6

RDAOU
Mentor
Mentor
‎01-23-2020 02:22 AM

@Anonymous 

 

  1. The wall is attached to the slab … detach it
  2. Or wall has upper constraint …reset it

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Report
Message 3 of 6

Anonymous
Not applicable
‎01-23-2020 02:42 AM

you can unlock a wall layer to have different top heights.

Wall layers.JPG

Report
Message 4 of 6

Anonymous
Not applicable
in reply to RDAOU
‎01-23-2020 02:47 AM

Thanks @RDAOU @Anonymous 

I however got this after unlocking the top of the layer:

 

image.png

0 Likes
Like
Report
Message 5 of 6

RDAOU
Mentor
Mentor
in reply to Anonymous
‎01-23-2020 02:51 AM
Accepted solution

@Anonymous 

 

In the case you showed in the image you do not need to unlock them...

Detach >>> set top constrain of the wall to the upper level (OKFB) >> join Wall and Slab

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Report
Message 6 of 6

martijn_pater
Advisor
Advisor
in reply to RDAOU
‎01-23-2020 03:01 AM
Accepted solution

Follow instructions by @RDAOU above. You can then join the wall/floor after that. edit: never mind, already mentioned also.

Report
Report a website issue