view ref tag

view ref tag

Anonymous
Not applicable
3,455 Views
5 Replies
Message 1 of 6

view ref tag

Anonymous
Not applicable

Where do I find view ref tag.

 

My tag  in plan just say Ref and in type properties none.

 

how to I set to ref tag to read properly ?

0 Likes
Accepted solutions (1)
3,456 Views
5 Replies
Replies (5)
Message 2 of 6

ToanDN
Consultant
Consultant
Accepted solution

I am not sure if we are talking about the same thing but the screencast below shows a simple example of using Match Line and View References.

0 Likes
Message 3 of 6

Anonymous
Not applicable

Thanks for the screencast,

 

loaded tag from OOTB family. tag was seating in symbol-tag-arch-view ref.

its now referencing correctly.

Message 4 of 6

rbensleyDLXB4
Community Visitor
Community Visitor

Can you elaborate more on the fix. my view reference is still just showing up "REF" when i place it on the view.

0 Likes
Message 5 of 6

munderwoodX73WC
Explorer
Explorer

Go to Insert tab and then under Load from Library, click on Load Autodesk Family. Search for "View Reference" and load it into your project.

 

munderwoodX73WC_1-1673300016165.png

 

 

If this does not resolve the issue, click on your view reference text that is showing up as "Ref" and under the Properties panel, go to Edit Type. If the Value column for View Reference Tag is showing <none>, click on the drop down for it and select View Reference. Click Apply and that should resolve the issue.

 

munderwoodX73WC_0-1673299761167.png

 

Message 6 of 6

sakshi_handeXBCEG
Community Visitor
Community Visitor

Can't find View Reference in Load Autodesk Family.

sakshi_handeXBCEG_1-1741184702524.png

 

 

0 Likes