use same wall type but pattern not show when create new one

[wanlapha]

Hello, I am trying to create wall number 2 same as number 1 (pic). I use wall type same as number 1 but it not show pattern or color be like number 1. I want to know method of setting pattern wall like this and how to use this.

and pattern of this wall type doesn't use material browser to setting surface pattern. this pic is material browser of this wall type. 

[jvpantin2]

Walls belonging to the same type must look the same always, unless an override were applied. Use Match Type Properties (MA) to verify this. Something else could be happening.

[kostask_oionei · Accepted solution]

Hi,

Did you create both wall types?

If the screenshot shows the nr 1 wall material, the pattern was probably applied with "paint" command directly at the wall faces.

You have to find this pattern and put it to "surface pattern" -> foreground for apply to wall type.

[barthbradley]

Looks like one wall is painted with a material and the other not.  The pattern on the end of the wall is what leads me to that assumption. 

[wanlapha]

ok I can solute from a solution.I use paint directly change material wall. thanks.