Underlay turned on when plans drawn

[Anonymous]

Hi All, i accidentally drew my site plan with an underlay turned on, so now when i turn it off items disappear. Is it possible to correct this or do i need to have this plan set with the underlay turned on to levels they were drawn in (not ideal), thanks for your help  

[ToanDN]

Which level does the Underlay indicates?

[Anonymous]

If Underlay at Base level ground floor and top level top of pitch it captures everything drawn, when i change levels i loose items drawn. Obviously i should have not drawn with overlay on but is there a way to reset underlay to off or should i just vive with the underlay turned on for this plan, thanks Toan  

[ToanDN]

It sounds like you drew stuff on a different level. Open the base level and check if they are there. Feel free to post your file here.

[Anonymous]

 No i drew items on correct levels, does having underlay on when drawn determine what levels they appear? If not then must be a visibility setting

[Anonymous]

Changed underlay back to none and adjusted view range and the site plan items are there.

So seems drawing items on a plan with underlay set to a level does not have an effect on where the items are drawn (i think). 

Can draw quite complex buildings but View Range always rattles me!!!!!!!!! ill find a simple explanation one day 

[cbcarch]

Make sure to Set Workplane first, before modeling anything, to make sure what Level/Plane the objects are associated with.

Architecture Tab>Set Workplane> Select Level or Pick a Plane or Line

[Anonymous]

Hi Cliff, Sorry for late reply been away, good tip did not think of this