Trying to create custom stair

[RevitDriver]

I am trying to create this custom stair. I chose the boundary, stair treads and stair path from this sketch I have underlayed, it it won't build the stair. Says only one tread created. 

[ToanDN · Accepted solution]

Your sketch cannot overlap. 

Create two straight runs, convert them to sketch and edit each sketch to match the design.  Then you can have them overlapping like what you show.

[kh_jea]

While @ToanDN 's suggestion will work and look nice, well decent (let's be honest Revit is terrible at stairs) in 3D and section the connection between the 2 runs will look weird.

[RevitDriver]

Thanks, that worked. I posted a few pics of how it turned out. The railings still leave something to be desired. Is Revit working on a fix for stairs?  These were much easier in some of the older versions.

 

 

[RevitDriver]

Here's the finished product. Thanks for all your help!

 

[ToanDN · Accepted solution]

You can fix this by edit the railing path, select a segment and adjust Height Correction.

[RevitDriver]

Your Awesome! That worked.