Titleblock

[Anonymous]

I seem to have a problem when I change the sheet size. 

See for yourselves. I don't find the problemsome lines seem to be snapped on the left side of the sheet

[barthbradley]

Looks like you've created a parametric Titleblock family and that line work that is misbehaving is simply not constrained properly.  Align and lock the end points of those line to a stationary Ref. Plane. 

[Anonymous]

okay and how do I do this? The sheet is based on OOTB revit sheets.

Thanks for the help!

[barthbradley]

Post the family. I'll fix it and return it. 

[Anonymous]

Don't make the sheets parametric...just create a new titleblock family.

It's not worth the headache.

[Anonymous]

Thank you in advance. Sometimes revit can feel so counterintuitive... or probably my Revit knowledge isn't on point.

[barthbradley · Accepted solution]

I'm not readily seeing the issue you showed in your first post screenshot. In other words, I can't break it. But, if you just group all the labels, linework and logo together, that may give you better control over those elements.  

[Anonymous]

I don't know if it really is this which fixed it. I just started all over again and did the same as before. In the end i 'pinned' everything and grouped the complete title block, which seems to work.

Thanks for your time and effort!