Sweep molding at curved wall

[revitz7F85E]

hello

i am trying to make a sweep molding (model in place) at  curved wall it doesn't let me choose the curved wall face to start drawing the sketch path , i cant set a work plane for the curved wall so i can draw at it

Screenshot 2022-06-01 041635.png

 

[ToanDN]

Choose Pick Path, not Sketch Path to pick the sweep path. You can also use Wall Sweep tool.

[revitz7F85E]

well i want to draw at specific part of the wall not the whole wall if i used the method u mentioned i will take the 4 sides for the face of the wall but i want to do something looks like this

Screenshot 2022-06-01 060240.png

 

[revitz7F85E]

well i want to draw at specific part of the wall not the whole wall if i used the method u mentioned i will take the 4 sides for the face of the wall but i want to do something looks like this

 

[ToanDN]

I see. Create window or vertical opening to temporarily cut the wall, then create sweep using pick path from the edges of the opening. Delete the opening or move it to a future phase when done.

[revitz7F85E]

i did already used this strategy but i was looking for a method to apply it for complex shapes like making an opening for example like this opening at the curved wall like setting a workplan at the curved wall and start drawing my lines at for example

ddddd.png

 

[ToanDN]

You can use the opening or void method to create the edges for the sweep path for complex shapes.  It still is the easiest way.

ToanDN_0-1654061394080.png

[revitz7F85E]

wow that's impressive may you tell me how u did that thank you

[ToanDN · Accepted solution]

See screencast.

[revitz7F85E]

Thank you so much