SWEEP AROUND A WALL OPENING
You can build the sweep in a opening/door family so that you don't have to place them manually for every opening. Basically open any door family, get rid of the panel(s) and linework such as swing lines, keep the frame, save as and load it in.
If you want to use Wall Sweeps, then model 2 vertical and one horizontal, use their grip to adjust the length, then join.
in past i have done this with a Door/window "Opening" family, no door or window, just the opening and the sweep. if you do it as a Door/Window opening, you can also schedule the opening :-). ill see if i can find one and post it.....
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
start with this.... edit the opening as needed.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Attached is a trapezoid you can "shape" with shape handles in the Project.
Note: Trim size controlled via "Pw" and "Ph" Instance Parameters.
