Survey Point / basepoint behaviour different in 2021?

[Joris.vd.Meulen]

So in 2019 I was able to move Project Base point about anywhere. 2021 ... I can't: it's limited to 16kilometers.

Moving survey point and using spotcoordinate (type setting to survey point) still reports to internal origin?

Or am I missing things here?

[ennujozlagam]

maybe you can refer to this Article and see if helps. thanks

[Ilic.Andrej]

@ennujozlagam I wonder why you always say "thanks" when you are the one who is helping others xD

[ennujozlagam]

just sign of respect to others, you may not know if you be able to help them or not. thanks 😉

[Joris.vd.Meulen]

Ok. so they nerfed the projectbasepoint movement in 2021.

BUT spotcoordinate still doesn't work?  Screenshots show surveypoint as basepoint for coordinate ... still 1000 is shown.

[barthbradley]

Looks to me like the Survey Point Origin is located at the Project Base Point.  You must have moved the Survey Point while UNCLIPPED.  

[barthbradley]

[barthbradley]

[Joris.vd.Meulen]

doesn't your last screenshot do exactly the same?

your (-6, -6) is relative to projectbase point NOT to survey point. 

your tag should say (-11,-11). Right?

[barthbradley]

---

@Joris.vd.Meulen wrote:

doesn't your last screenshot do exactly the same?

your (-6, -6) is relative to projectbase point NOT to survey point. 

your tag should say (-11,-11). Right?

---

No, that's what I'm trying to explain to you. The tag's Coordinate Base is Survey Point  -- as pointed out in red -- meaning that it is referencing the Survey Point ORIGIN, which remained at the Project Base Point when I moved the Survey Pont MARKER.  Why did the SP Origin not move with the SP Marker?  Because I UNCLIPPED the Survey Point before moving it.   If I had left the Survey Point CLIPPED then the Marker + Origin would have moved together and the Tag would be reading -11, -11 -- not -6,-6.   

[barthbradley]