Structural Framing-Dimension Wood

[KirkLB]

Presently I am involved with a basement design and understand the placement of exterior and interior doors. What I am trying to do is show just the wood stud walls with no sheet rock or exterior siding attached and the spacing between each stud. Is there a way to use the Dimension Wood found in Structural Framing to create the walls without having to invest in a third party program? Where can I can that helps explain the properties so I can have a vertical stud rather than a horizontal one.

[barthbradley]

You can do it quite easily with Curtain Walls, using Mullions for Dimension Lumber and Empty System Panels.   

And/or use Beams and Columns.  

CW Example:

[KirkLB]

By using this method I will be able to place windows and doors into it as well?

[barthbradley · Accepted solution]

Sure. Frame the Opening, change the Empty System Panel in the opening to Basic Wall Type and host your Door/Window to the Basic Wall Type Panel.  

[KirkLB]

Thank you for your time and help.

[barthbradley]

Door in Stud Wall Curtain Wall example:

[syman2000 · Accepted solution]

You can check this topic with some sample curtainwall framing.

https://forums.autodesk.com/t5/revit-architecture-forum/extrusion-too-thin-warnings/m-p/9923202#M306...

[KirkLB]

I do appreciate all the help I can get. This will take some time but with all the responses I believe I can make it happen