Good morning, I'm having trouble getting this street gutter family to line up. I have corners that are not straight and I would like it to line up with them.
Here is the situation:
street gutter curve
have you tried an Model In-Place (you can categorized it as a Plumbing Fixture) and use the Sweep tool? you can create a profile to load and use for the shape of the gutter.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Model in Place is done in the Project Model, it is not a RFA Family.
Architecture ribbon > Component > Model In Place. you can use the sweep tool and use the Pick Line option and pick the arch to select your path.
http://help.autodesk.com/view/RVT/2017/ENU/?guid=GUID-68DBFA52-DF77-4B3F-84AC-F20194FADC64
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I'll add an FYI...if your gutter is following a System Family Roof or Floor, the Roof Gutter and Floor Slab Edge will follow a curvature. You can extrude just about any profile you can sketch. Create a Profile using the Profile Template and indicate the Profile Usage. Then load into your Project and assign the Profile Family it to a System Family TYPE, such as Gutter shown in screenshot.
