STAIRS

mishkt · ‎10-15-2016

Hello,

I tried to create stairs, but I do not why, I have different heights of risers and one riser just didn't create.

I attached some screenshots of plan, section and 3d view.

Level height - 3240 mm

18 risers

Riser height - 180 mm

Thank you for your help

ennujozlagam · ‎10-15-2016

Hello, pick your stair edit then go to properties uncheck end. Thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

mishkt · ‎10-15-2016

Thank you for answer.

Uncheck in type properties?

If yes, it doesn't work

ennujozlagam · ‎10-15-2016

Hello, check my stair screencast video and see if can help you. Thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

ToanDN · ‎10-15-2016

@mishkt If doing what @ennujozlagam suggested doesn't work, you may want to edit the stairs and recreate the problematic run. Feel free to post the Revit file if you want us to look at.

Community

STAIRS

STAIRS

STAIRS